Product Detail
Basic Info
Model NO.:DSU1564
Trademark:Dongsheng
Specification:The Third Party
Origin:China
Product Description
Linear Solenoids/Open Frame Solenoids/Push-Pull Solenoids-DSU1564(IR-CUT/Electromagnets/Solenoid valve/Solenoid Pump)
1. Main size: Diameter--15mm, Length--64mm
2. Performance:
1) U-shaped frame design, belongs to open frame Linear Solenoids
2)The moving iron core will flexible move after the power supply
3) Can be designed to pull and push type
3. Operating voltage: DC3~48V
4. Operating environment temperature: -10 ~180 (degrees)
5. Withstanding voltage: Between the coil and the framework AC1200 (50/60Hz) I seconds (10mA)
6. Temperature rise limit: Under voltage DC12V, the temperature rise less than 65 degrees
7. Service Life: 1.5million times (Power-on for 2 seconds, power failure for 2 seconds)
8. Advantage:
1) Long stroke, fast heat dissipation, large output
2) reliable action
9. Main purpose: It is mainly used in electronic amusement equipment and so on.
The following are needed as a minimum to enable Linear solenoids selection:
1. How long is the stroke movement of the Linear Solenoid?
Travel in mm / inches
2. How much is the force requirements of the Linear Solenoid?
3. How much is the duty cycle of the Linear Solenoid?
On time / off time ratio
4. How is the working environment of the Linear Solenoid?
Ambient temperature / wet or dry / clean or dusty/ vibration / etc.
5. What is the power supply of the Linear Solenoid?
Voltage / AC or DC
6. What is the installation method of the Linear Solenoid?
Space envelope / mounting preference / plunger design
Instructions:
The Solenoid is a non-standard component; We will constantly have new product research and development. Please contact us to customize the parameters or new products, if you don't find your suitable Solenoid.
Notice:
Please attention to the positioning surface of the Solenoid when you are designing and installing.
1. Main size: Diameter--15mm, Length--64mm
2. Performance:
1) U-shaped frame design, belongs to open frame Linear Solenoids
2)The moving iron core will flexible move after the power supply
3) Can be designed to pull and push type
3. Operating voltage: DC3~48V
4. Operating environment temperature: -10 ~180 (degrees)
5. Withstanding voltage: Between the coil and the framework AC1200 (50/60Hz) I seconds (10mA)
6. Temperature rise limit: Under voltage DC12V, the temperature rise less than 65 degrees
7. Service Life: 1.5million times (Power-on for 2 seconds, power failure for 2 seconds)
8. Advantage:
1) Long stroke, fast heat dissipation, large output
2) reliable action
9. Main purpose: It is mainly used in electronic amusement equipment and so on.
The following are needed as a minimum to enable Linear solenoids selection:
1. How long is the stroke movement of the Linear Solenoid?
Travel in mm / inches
2. How much is the force requirements of the Linear Solenoid?
3. How much is the duty cycle of the Linear Solenoid?
On time / off time ratio
4. How is the working environment of the Linear Solenoid?
Ambient temperature / wet or dry / clean or dusty/ vibration / etc.
5. What is the power supply of the Linear Solenoid?
Voltage / AC or DC
6. What is the installation method of the Linear Solenoid?
Space envelope / mounting preference / plunger design
Instructions:
The Solenoid is a non-standard component; We will constantly have new product research and development. Please contact us to customize the parameters or new products, if you don't find your suitable Solenoid.
Notice:
Please attention to the positioning surface of the Solenoid when you are designing and installing.