Model NO.: EMW5-110L/1
Diameter: 1100mm
Voltage: DC-220V
Duty Cycle: Td-60%
Lifting Capacity for Steel Ball: 6500kg
Lifting Capacity for Steel Scraps: 450kg
Specification: Lifting Steel Scraps On Excavator
HS Code: 85059010
Type: Install on Excavator
Current: 35A
Power: 7.7kw
Coil Compasition: Aluminium Wire
Lifting Capacity for Casting Ingot: 1000kg
Trademark: Zhongnan or OEM
Origin: Yueyang, Hunan, China
Technical Data:
Normal Temperature Type DC-220V TD-60%
Temperature for material to be lifted: below 200 degree.
| Model | Current (A) Cold/hot State | Cold-state power (kw) | Lifting Capacity (kg) cold/hot state | Mass (kg) | Diameter (mm) | ||
| steel ball | cast iron | steel scrap | A | ||||
| EMW5-110L/1 | 35/22.8 | 7.7 | 6500 | 1000/800 | 450/400 | 1350 | 1100 |
Working Range of Excavator Suiting with Magnet:
Lifing Capacity Compare Drawing:
Complete Set of Excavator Lifting Magnet:
-Lifting Magnet
-Control Cabinet
-Generator (Optional: Diesel generator or Hydraulic generator)
Excavator Lifting Magnet for Steel Scraps
EMW Series Lifting Magnet is installed on excavator designed to handle steel scraps,
casting Ingot, turning and steel ball.
Applications:
It is made of aluminum wire and the coil protection plate is made of highly rolled
Manganese plate.
This series adopts the vacuum drying and glue filling method so as to enable the
fine insulation performance. The Mica is used as the Heat barrier material.
Features:
The protection plate for coil adopts abrasionresisting and shockproof rolling
high-manganese steel.
The electromagnet is dealt with special technology, thus insulation grade can be up
to Grade F.
Coils of magnets are made of Aluminum (flat aluminum wire covered by double
spun glass) or cooper.
High lifting capacity, light self-weight. Low power consumption, long service life.
Three types for option:
-- Normal temperature type (DC-220V TD-60%):for lifting normal temperature steel scraps.
-- High frequency type (DC-220V TD-75%):for lifting normal temperature steel scraps in high frequency use.
-- High temperature type (DC-220V TD-60%):for lifting high temperature steel scraps or lift steel scraps in high temperature
environment use.
Lifting Magnet Usage Picture:
Partial Testing for Lifting Magnet before Delivery:
1.Pressure Testing at 2000V, 50HZ.
2.Inter Turn Testing at 550V.
3.DC Resistance Testing.
4.Insulation Resistance Testing.
5.Electric Clearance Testing.
6.Creep Distance Testing.
7.Lifting Capacity Testing.
8.Control Cabinet Testing.
9.Other Testing for Magnet Size & Appearance.
Delivery Package: Standard Export Package
(fixed iron frame with five-plywood board packing to keep safety and long-distance
transportation)
About Inquiry:
To help you get the best magnet for your application,
we should have the following information:
1. What are the materials you want to lift?
2. What kind of steel and iron? For example: Steel scraps,
steel billet, ingot, plate, bar or ball.
3. What' s the lifting capacity you expect?
4. What kind of working site does the magnet work? Indoor or outdoor?
5. Kindly provide information of your power information (AC/DC_V, _Hz)
6. Information for your excavator.
Quick Response:
Enquries by email, fax or instant message is high appreciated.
Your enquiry will be replyed by email & fax within 24 hours.
Please feel free to call us at any time for any questions or documents wanted.
Pre-sales Service:
All of our technical proposal will be offered by our senior engineers, based on your request.
Full production process will be shown to you by photos & video during manufacturing.
Package & Transportation:
Packed in Ply-wooden Box, with fixed iron frame.
All available shipping ways could be applied, by courier, air or sea.
Appointed shipping company or our own forwarders all could be used in shipment.
Full-way tracking the cargo for you till the goods arrive.
After-sales Service:
After sales service and technical support could be offered within guarantee period.
Site maintenance could be also provided.
Customers Visiting: