Compact Water Circulation for OEM Systems

• 24V DC platform: Designed for compact appliance and circulation systems.
• Pump head above 2m: Supports systems with vertical lift and tubing resistance.
• 2.0–2.5L/min-class flow platform: Existing sources show different guarantee values; request the latest approved specification.
• Compact 26mm-class body: Supports integration into space-limited equipment.
• Pump-level noise below 60dB: Measured at 30cm under the stated test setup.
• Documented endurance profile: More than 5,000 hours under a 10-second ON and 7-second OFF test cycle.

Technical Specifications

Freshwater Aquarium Circulation Evaluation

SC2611LPW can be evaluated for compact freshwater aquarium circulation if its operating point matches the required flow after accounting for lift height, filter resistance, tubing, and elbows. Confirm whether the installation uses a flooded inlet and whether the pump is approved for continuous operation.

(PS. The current documents do not establish saltwater compatibility, submersible installation, fish-safe materials, or dry-running capability, and these require separate validation.)

Fountain and Appliance Water Circuits

The compact centrifugal structure can support small fountain and appliance circulation projects. Verify water temperature, material compatibility, duty cycle, inlet conditions, and blockage protection in the finished system.

Flow and Head Selection

Free-flow rate and maximum pump head occur at different operating points. Select SC2611LPW from the complete flow-versus-head curve and the system resistance curve. Do not assume the pump delivers its maximum flow at a 2m lift.

System Integration Notes

• Confirm the minimum inlet water level and priming procedure.
• Do not run dry unless dry-running capability is separately approved.
• Use an inlet screen if particles may enter the pump.
• Validate noise and vibration after mounting in the final enclosure.
• Test motor temperature at the longest actual operating period.
• Confirm freshwater, saltwater, temperature, and material compatibility separately.
•  

About SKOOCOM

Over more than two decades of exploration and development, Skoocom has established four subsidiaries, each responsible for one of four key sectors: Product R&D, Precision Molding, Precision Rubber, and Liquid Silicone Rubber. This not only creates economies of scale but also continuously strengthens the foundation for Skoocom's growth and expansion by reducing costs, improving service quality, and enhancing innovation capabilities. The company has introduced a wide range of advanced equipment to ensure that every step-from raw materials to finished products-undergoes rigorous inspection, control, and testing, so that every product can meet the diverse application needs of different customers.

 

Our factory & equipment

 

Our Certificate

 

Frequently Asked Questions

1. Is SC2611LPW a diaphragm pump?

No. The product webpage and technical PDF identify SC2611LPW as a centrifugal water pump. The existing diaphragm-pump URL and template text should be corrected.

2. Can SC2611LPW be used in an aquarium?

It can be evaluated for compact freshwater circulation after the required flow, lift, filter resistance, installation mode, and duty cycle are confirmed. The current documents do not specify saltwater or submersible use.

3. Does the pump deliver maximum flow at a 2m head?

Not necessarily. Maximum flow and maximum head normally occur at different operating points. Use the complete flow-versus-head curve for selection.

4. Can SC2611LPW run dry?

Dry-running capability is not established by the current centrifugal-pump documents. Keep the pump supplied with water unless a separate test approves dry running.

5. Is the pump rated for continuous 24/7 operation?

The visible endurance condition is an intermittent 10-second ON and 7-second OFF cycle. Continuous operation requires separate thermal and lifetime validation.