Top Quality Frac Hose Nitrile Rubber

Aug 10, 2017 Leave a message

Basic Info

  • Material: TPU

  • Color: Black

  • Trademark: ZYfire

  • Origin: China

  • Capability: Rubber Oil Hose

  • Size: 2 Inches to 16 Inches

  • Transport Package: Carton or Pallet

Product Description

NBR frac water hose 


 

Tube and  cover:  Nitrile /PVC Blend, ribbed cover for maximum abrasion resistance thick wall. 

Reinforcement: 100% virgin high tenacity polyester Jacket  

Color: Black, Red, Yellow, orange, Blue  

Package: Rolled,  packed in carton or loaded in pallet 

Application: Water discharge,  Transfers,  Drainage,  Irrigation installations,  Pumping  of  sludge  and  liquid  fertilizers,  Irrigation,  Chemical  industry,  Refineries,  Air-pressure  Premium  Solution 

Standard length: 15m (50ft),  20m (66ft),  30m (100ft),  60m(200ft),  90m (300ft), 200m(660ft), 300m(990ft),  also  can  be  customized  according  to  requirements 

Manufacturing Technology:  through-the-weave technology without delamination issues 

Hose shall be made from 100% high tenacity synthetic yarn circular woven and completely, protected and locked-in by tough highly resistant synthetic nitrile rubber, forming a single homogenous construction without the use of glues or adhesives of any type. 

Lining Properties:

a. Ultimate Tensile Strength:Tensile strength of the lining and cover shall not be less than 1500 psi (10,500 kpa ).

b. Ultimate Elongation: 400% minimum. 

c. Accelerated Aging Test 

The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 psi +/- 10 psi , (2100kpa +/- 70kpa) and temperature of 70degrees centigrade +/-1 degree centigrade (158 F +/- 18 F ) for a period of 96hours shall be , greater than 60% of the original properties stated. 

Temperature range: From -30 C deg to 80 C deg (-22 F deg to 176 F deg)

Abrasion Resistance: withstand 101000 cycles.