Several factors affecting the seal performance
1: velocity
Speed is very low (less than 0.03/s), taking into account the equipment running smoothly and whether there is a creeping phenomenon. High speed (less than 0.8M/s), lubrication of the ink may be destroyed, sealing due to lack of access to good lubrication and friction and the heat, resulting in greatly reduced service life. Recommended rubber and plastic with seals in 0.3M/s~1.2m/s speed range is more appropriate.
2: temperature
Low temperature will reduce the elasticity of rubber composite sealing and leak, and even the seals become hard and brittle. High temperature oil volume expansion, softened, resulting in rapid increase in seal friction resistance during exercise and reduced pressure. Recommended rubber composite sealing continuous working temperature -10~+80 degrees centigrade.
3: working pressure
Oil seal with minimum starting pressure requirements. Low voltage low friction properties. aerodynamic resistance of the oil seal. 2.5Mpa, rubber composite sealing was not right to consider when high pressure seal pressure, need anti extrusion ring grooves also has special processing requirements.
Several factors affecting the seal performance
Sep 12, 2016
Leave a message

