Basic Info
Model NO.: life casting 228800 228820
Material: Silicone Rubber
Form: Liquid Rubber
Mixing Ratio: 1:1
Cure Time: 2-8hours
Product Name: Food Grade Lace Silicone Rubber for Lace Cake Mold
Transport Package: 5kg/Drum, 25kg/Drum, 200kg/Drum
HS Code: 3910000000
Raw Material: Silicone Rubber
Appearance: Fluid Liquid
Color: Translucent, White, Black, Any Color Required
Open Time: 10-40minutes
Shrinkage: 0.001
Trademark: Lianhuan Group
Origin: Shenzhen, China
Product Description
1.Description of 1:1 mixture food grade silicone rubber
F5020 Silicone rubber is addition cure silicone rubber for mold making and silicone products. The silicone rubber will be cured under room temperature and can be cured faster by heating, It's two-components liquid silicone rubber , the mixing ratio is 1:1 . It has an exceptional fluidity and good operability. Especially ,the platinum cure silicone rubber has a lower shrinkage ,higher temperature resistance and it is food grade.
2.Characteristics of 1:1 mixture food grade silicone rubber
*An exceptional fluidity and good operability
*Good tensile strength and tear strength
*Food grade silicone rubber
*high temperature resistance
*good flexibility
*No smell ,non-toxic
*long shelf-time &lifetime
*Lower shrinkage
3.Application of 1:1 mixture food grade silicone rubber
F5020 silicone rubber is food grade silicone rubber, it is suitable for food mold making . it is suitable to make mold for decorative cake lace mold, custom candy or ice mold, even personalized chocolate, fondant or cake molds.
4.Datesheet of 1:1 mixture food grade silicone rubber
Product | Catalyzed Viscosity:cps | Base Color | Specific Gravity | Mixed Ratio | ShoreA Hard | Tensile (Mpa) | Elongation % | Shrinkage % | Tear KN/m |
F5020 | 11,000 | Translucent | 1.08 | 1:1 | 8-25 | ≥2.8 | ≥500 | 0. 1% | ≥2.0 |
5.Operating instructions of platinum cure silicone
Step 1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .
Step 2: Take the silicone and catalyst as the ratio1:1 (part A:part B=1:1) ,mix the silicone rubber and catalyst evenly.
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.
Step 4: Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on the prototype
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.
Notice of food grade silicone rubber
F5010 is platinum cure silicone , which is very easy to cause cure inhibition , so please do remember thoroughly clean the model and tool before operation . Besides , please avoid the condensation silicone rubber (100:2) contact or mix with the following material , otherwise the silicone won't be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic tin compounds )
2. Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4. impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber
what can we provide?
1.Free sample of 1kg for testing by UPS.
2.Various range of export trading forms: FOB,CFR,CIF,DDU.
3.Goods delivery by air or by sea.CFR price shipped by our forwarder could be even more economical than FOB price.
4.Professional own forwarder is more experienced at custom clearance issue and more guaranteed about safety shippment and delivery time.
5.To help you reduce the customs clearance fees, we can offer all kinds of Certificate of Origin related to different countries including CO, FORMA,FORME,FORMF,etc.
Why Choose Us?
1.Free Sample
2.Sample Test
3.Technical Support
4.Engineers Site Instruction
5.New products developing
6.New Market developing
7.Factory Visiting Reception
8.China visiting reception
9.China Latest silicone news
10.Related Products Purchasing Assistance
11.More than 20 years experience in producing liquid silicone rubber