Shenzhen Skoocom Electronic Co.,Ltd is one of the leading manufacturers and suppliers of SC2717XPW High-Flow Self-Priming Water Pump 1L/min in China. We provide high quality products for medical devices and beauty appliance. Welcome to wholesale RoHS, REACH and ISO certified products made in China here and get quotation from our factory. Also, custom service and ODM service are available.
SC2717XPW High-Flow Self-Priming Micro Diaphragm Water Pump (DC 6V / 12V / 24V)
Current Standard Model: SC2717XPW | Old Model: SC3721PW (Direct Drop-in Replacement)
Industrial-grade 370-series micro diaphragm water pump delivering >1000 mL/min flow rate, >1.0m vertical dry self-priming lift, and ≥20 Psi output pressure. Specifically engineered for bottom-loading tea bar machines, countertop water purifiers, commercial coffee brewers, and instant beverage dispensers requiring deep-reservoir water suction, rapid jug filling, and durable 50-second continuous duty cycles.
Built for Bottom-Loading Tea Makers, Purifiers & Commercial Coffee Machines
>1.0m Deep Vertical Dry Self-Priming: Easily elevates water from bottom-cabinet bottled reservoirs up to tabletop faucets without pre-priming, eliminating air-pocket stalling and boiler dry-burn.
>1000 mL/min Fast Water Dispensing: Outputs up to 1.18 L/min under unconstrained flow, filling a 1.5-liter tea kettle in approximately 80–90 seconds for effortless beverage preparation.
≥20 Psi Pressure Head to Penetrate In-Line Filters: Generates ample hydraulic pressure to overcome backpressure from post-carbon filters, check valves, and heating coils without stream sputtering.
15,000 Heavy-Duty Cycles (50s ON / 20s OFF): Rigorously tested under an extended 50-second continuous pumping duty cycle to ensure motor and diaphragm reliability during large-kettle fills.
Stepped Anti-Slip Barbed Spigot (ø7.0–ø8.5 mm): Features a secure multi-tier barb that grips food-grade silicone tubing firmly, preventing leaks or hose blowouts under 20 Psi pressure pulses.
Quiet Operation (<65 dB, 50–54 dB Typical): Well-balanced 370 motor and smooth diaphragm displacement dampen hydraulic pulsation, keeping office and tea room environments quiet.
Technical Specifications
*Source: Verified from official Skoocom engineering drawing SC2717XPW (SC3721PW). Ambient operating temperature: 0~50 °C, 75% RH. Standard engineering tolerances apply (±0.2mm to ±0.5mm).
| Parameter | DC 6.0V Spec | DC 12.0V Spec | DC 24.0V Spec | Test Conditions & Remarks |
|---|---|---|---|---|
| Current Standard Model | SC2717XPW | Latest production generation | ||
| Old Model | SC3721PW | 100% mechanical & performance drop-in compatible | ||
| Rated Operating Current | < 1200 mA | < 600 mA | < 350 mA | Tested under full rated operating hydraulic load |
| Output Water Flow Rate | > 1000 mL / min (Peak up to 1180 mL/min at 0 Psi) | Smooth delivery across 0–20 Psi working range | ||
| Self-Priming Suction Lift | > 1.0 m (> 100 cm vertical dry lift) | Instantaneous dry self-priming from bottom water bottles | ||
| Discharge Pump Head | > 1.0 m (> 100 cm vertical water head) | Vertical lift capability for tabletop dispensers | ||
| Maximum Positive Pressure | ≥ 20 Psi (≥ 137.9 kPa / 1.38 bar / 1034 mmHg) | Sustained pressure against filter & valve backpressure | ||
| Operating Acoustic Noise | < 65 dB (At 30 cm distance) | Tested on damping pad (50–54 dB typical running noise) | ||
| Endurance Cycle Life | 15,000 cycles (50s ON, 20s OFF heavy-duty duty profile) | Simulates extended continuous water-jug dispensing | ||
| Applicable Fluid Media | Potable Drinking Water, Purified Water, Softened Water | Food-grade contact EPDM diaphragm & engineering plastics | ||
| Overall Envelope Dimensions | 65.60 mm (L) × ø27.00 mm (Pump Head Ø) × 40.00 mm (Flange Width) | Flange thickness: 3.00 mm | Mounting pitch: 30.0 mm | ||
| Port Barb Geometry | Main Outlet: ø7.0 / ø8.0 / ø8.5 mm stepped barb | Inlet: ø4.50 ± 0.2 mm | Mated with 6.0×9.0mm or 4.0×7.0mm food-grade tubing | ||
| Flange Mounting Geometry | 2-ø3.1 mm mounting holes with 30.0 mm pitch | 12.5mm bracket | Anti-vibration bracket for chassis noise isolation | ||
Application Focus: High-Flow Water Pumping in Pure Water & Beverage Hardware
1. Bottom-Loading Tea Bar Machines & Water Dispensers
Modern bottom-loading tea bar machines conceal the heavy 5-gallon water bottle inside the lower cabinet. SC2717XPW delivers >1.0m vertical dry suction to lift bottled water effortlessly to the top dispensing tap. Its high-volume >1000 mL/min delivery rate fills a 1.5L kettle in under 90 seconds, while its 50s ON / 20s OFF rating ensures continuous motor reliability during large-kettle boil cycles.
2. Countertop RO & Ultrafiltration Purifiers
Countertop water purifiers rely on constant post-filtration pressure to push purified water through remineralization filters and UV disinfection tubes. SC2717XPW provides ≥20 Psi output pressure to overcome filter flow resistance, ensuring an energetic, splash-free laminar flow from the drinking spout.
3. Commercial Capsule Coffee Makers & Automatic Tea Infusers
Commercial beverage equipment demands consistent metering and zero chemical taste transfer. Featuring certified food-grade EPDM elastomers and quiet diaphragm action (50–54 dB), SC2717XPW meters fresh water into boiler heating blocks with exact consistency across thousands of daily coffee and tea brew cycles.
Our factory & equipment
Our Certificate
Company introduction
About us
Over the past two decades, SKOOCOM has not only established a solid reputation for its products' durability and performance but has also continuously invested in research and development to improve the technology and design of its micro pumps and valves. This dedication to innovation has allowed the company to stay at the forefront of the industry, offering solutions that meet the evolving needs of various applications, from industrial automation to medical equipment.
In addition to its standard product line, the company also offers customized solutions for specific customer requirements. With a team of experienced engineers and state-of-the-art manufacturing facilities, the company is well-positioned to provide tailored products that deliver optimal performance and reliability.
Looking ahead, the company is exploring new markets and applications for its micro water pump, micro air pump, and micro pump valve technologies. As industries continue to advance and the demand for precise, efficient pumping solutions grows, the company remains committed to providing innovative and high-quality products that can withstand even the most challenging environments.
This commitment to excellence and continuous improvement ensures that customers can rely on the company's products for years to come, making it a trusted partner in the global market for micro pump and valve solutions.
Our Certificate
FAQ
Q: Are your micro pumps & valves compliant with RoHS and REACH standards for global market entry?
A: Yes, all raw materials used in our micro diaphragm pumps and valves - including the rubber diaphragms and plastic casings-fully comply with RoHS and REACH environmental standards. We can provide testing reports upon request for seamless international compliance.
Q: How long is the deliver[Producing] and shipping ?
A: Batch orders will be shipped in 25 working days. Sample order will be shipped within 3 working days.
Q: Do you offer samples for engineering testing before we place a bulk order?
A: Yes, we strongly encourage sample testing. We can prepare customized samples according to your technical requirements within 3-7 working days so your R&D team can perform real-device testing.
Q: What is your manufacturing capacity and experience with large-scale or Fortune 500 clients?
A: We operate an ISO9001-certified production facility with strict 100% QC inspection (air tightness and performance tests) before dispatch. Having served global clients: including Fortune 500 enterprises. We maintain stable lead times and reliable mass-production consistency.
Hot Tags: SC2717XPW High-Flow Self-Priming Water Pump 1L/min manufacturers, suppliers, factory, customized, mini size but high pressure water pump, long time time liquid pump, Micro Water Pump, hot water pump, high flow electric pumps, small negetive pump
