Shenzhen Skoocom Electronic Co.,Ltd is one of the leading manufacturers and suppliers of SC0801XPW Micro Diaphragm Water Pump for Sweeping Robots in China. We provide high quality products for medical devices and beauty appliance. Welcome to wholesale RoHS, REACH and ISO certified products made in China here and get quotation from our factory. Also, custom service and ODM service are available.
Products Description
SC0801XPW Ultra-Slim Micro Diaphragm Water Pump for Sweeping Robots
Model: SC0801XPW | Old model: SC3101PW
Engineered specifically for robotic vacuums, automated mop modules, and smart household appliances requiring micro-precision water seepage (40–60 mL/min) and space-constrained 8.0 mm chassis integration.
Engineered for Autonomous Floor-Care Hardware
- Ultra-Narrow 8.0 mm Profile: Extremely compact cross-section (8.0 × 18.0 × 32.5 mm) fits directly into onboard electronic water tanks, preserving internal cavity volume for LiDAR, dustbins, and batteries.
- Precision Seepage Control (40–60 mL/min): Eliminates flooring water puddles. Delivers stable micro-droplet flow compatible with multi-level PWM regulation (light dampening to deep scrubbing).
- 100,000-Cycle Intermittent Endurance: Validated across 100,000 duty cycles (5s ON / 5s OFF), built specifically to endure repetitive pulse-spraying without coil degradation or diaphragm rupture.
- Self-Priming & Anti-Airlock (≥3 Psi / 15 kPa): Generates sufficient pressure head to clear air pockets and push past internal check valves and micro-nozzle filters instantaneously.
- Low-Current Cordless Friendly: Draws <200 mA at 3.0V DC and <150 mA at 6.0V DC, maximizing battery efficiency and reducing heat dissipation inside enclosed plastic chassis.
-
Technical Specifications
*Source: Verified from Skoocom Engineering Drawing SC0801XPW (SC3101PW). Tested at 0~50°C, 75% RH. Dimensions follow standard engineering tolerance (±0.2mm to ±0.5mm).
| Parameter | Specification (DC 3.0V) | Specification (DC 6.0V) | Test Condition & Notes |
|---|---|---|---|
| Product Model | SC0801XPW | New generation standard model | |
| Old Model | SC3101PW | Backward-compatible mounting footprint | |
| Rated Voltage | DC 3.0V | DC 6.0V | Low-voltage DC drive system |
| Rated Operating Current | < 200 mA | < 150 mA | Operating under rated fluid load |
| Water Flow Rate | 40 – 60 mL/min | Unrestricted liquid flow output | |
| Discharge Pressure | ≥ 3 Psi (15 kPa) | Positive pressure against closed discharge | |
| Operating Noise Level | < 60 dB | Measured at 30 cm distance on damping pad | |
| Lifetime Durability | ≥ 100,000 cycles | Standard test: 5s ON, 5s OFF intermittent cycle | |
| Working Fluid Media | Clean Water | Tap water / neutral floor-cleaning solutions | |
| Overall Dimensions (W × H × L) | 8.0 × 18.0 × 32.5 mm | Main body (Excluding nozzle extension) | |
| Nozzle Geometry | Inlet/Outlet: ø 3.5 ± 0.2 mm (L: 5.2 ± 0.2 mm) | Port spacing pitch: 10.3 ± 0.3 mm | |
| Terminal Interface | 2.4 ± 0.3 mm Solder Lug | With positive terminal polarity marking (+) | |
Why Sweeping Robot Tier-1 Brands Standardize on SC0801XPW
1. Intelligent Micro-Seepage Electronic Water Tanks
Passive gravity drip systems frequently suffer from nozzle calcification, uneven wetting, and water puddling when the robot halts. The SC0801XPW diaphragm pump works in tandem with the robot's microcontroller to pump exactly 40–60 mL/min, ensuring balanced hydration across composite fiber mopping pads on marble, tile, or hardwood floors.
2. Compact Integration into Ultra-Low Profile Chassis
As robotic vacuum chassis heights drop below 80mm to clear under-bed dust accumulation zones, interior component stacking becomes intensely crowded. With an ultra-narrow 8.0 mm body width and 32.5 mm length, SC0801XPW embeds flush against the water reservoir partition without interfering with drive wheel suspensions.
3. Base Station Self-Cleaning & Fresh Water Metering
In all-in-one charging docks featuring automatic mop-washing, SC0801XPW can be utilized as an auxiliary metering pump to inject precise dosages of clean water or concentrated detergent into the scrubbing tray.
Company introduction
Engineered & Manufactured by Skoocom Precision
Founded in 1998, Shenzhen Skoocom Electronic Co., Ltd. (Time Electronics) is recognized by the Ministry of Industry and Information Technology (MIIT) as a National "Little Giant" enterprise. For over 26 years, we have specialized in microfluidic control components, serving over 1,500 enterprise clients globally.
Dual Manufacturing Bases (50,000+ m²)
Operating dedicated production bases in Songshan Lake (Dongguan) and Zhong'an Industrial City (Zhaoqing), our facilities encompass over 50,000 square meters, 500+ employees, and automated assembly lines delivering an annual capacity of 50 million units.
In-House Tooling & Rubber Vulcanization
We maintain full vertical control over injection molds and internal rubber compounding. The elastomeric diaphragms inside SC0801XPW are made of specialized anti-aging silicone/EPDM, preventing chemical degradation caused by floor cleaning detergents.
Certified Quality Management
Operating under strict ISO 9001 quality systems, our products comply with RoHS, REACH, and FDA safety directives. Every SC0801XPW unit undergoes 100% pneumatic sealing and hydraulic flow bench verification before delivery.
Our factory & equipment
Our Certificate
FAQ
Q: Can SC0801XPW Handle Diluted Floor-Cleaning Detergent Solutions?
A: Yes. The internal fluid-contacting diaphragm and valve disc are manufactured from custom-formulated synthetic rubber, offering excellent chemical resistance to standard household non-foaming floor detergents and mild alcohol solutions.
Q: How Does SC0801XPW Differ From The Legacy SC3101PW?
A: SC0801XPW is the official updated model for SC3101PW. It preserves identical outer dimensions (8.0 × 18.0 × 32.5 mm), port diameter (ø3.5mm), and mounting interfaces, while enhancing the diaphragm formulation to achieve a certified 100,000-cycle life expectancy.
Q: What Tube Size Is Recommended For The Ø3.5mm Nozzle?
A: We recommend food-grade silicone tubing with an Inner Diameter (ID) of 2.5mm to 3.0mm to ensure an airtight friction-fit seal capable of withstanding the ≥3 Psi operating discharge pressure without hose popping.
Request Evaluation Samples & 2D/3D CAD Files
Contact our application engineering team to evaluate fluid curves, custom wiring harness terminations, and OEM pricing.
Direct Sales Email: marketing@skoocom.com
Tel: +86-755-81461051
WhatsApp / WeChat: +86 18218809118
Headquarters: Shenzhen Skoocom Electronic Co., Ltd., Shenzhen, Guangdong, China
Hot Tags: SC0801XPW Micro Diaphragm Water Pump for Sweeping Robots manufacturers, suppliers, factory, customized, micro air pumps, Micro Water Pump Price, High Pressure Electric Water Pump, Dc Water Pumps, micro pneumatic pumps, Micro Vacuum Pump
