Basic Info
Model NO.: 656
Material: Silicone Rubber
Form: Liquid Rubber
Surface Curing Time (Min, 25oC): 20
Trademark: TBL
Origin: Foshan, Guangdong, China
Raw Material: Silicone Rubber
Appearance: Liquid
Hardness (Shore a): 15-60
Packing: 300ml
Transport Package: Tube
Product Description
Description
656 series are single component silicone rubber, quick-curing dealcoholization type. They are quick bonding silicone adhesive, with the advantages of neutral and non-corrosive, good insulation performance, moisture-proof, shock resistant, corona resistant and anti leakage of electricity, also with good tensile strength and bonding property after curing. They have good adhesion to metals and most of plastic, also with excellent resistance to cold and hot cycle performance after curing (-50---250oC).
Application
Adhesion to engineering plastics, metals, glass and ceramic objects; Adhesion to LED light, bonding and positioning electronic components on circuit boards, have the effect of strengthening and moisture-proofing.
Technical Data
| Indicators | Specification | ||
| Before Curing | Specific Gravity (g/cm3, 25oC) | 1.0-1.7 | |
| Surface Curing Time (min, 25oC) | ≤20 | ||
| After Curing | Mechanical Properties | Tensile Strength (Mpa) | ≥1.5 |
| Elongation (%) | ≥300 | ||
| Shear Strength (Mpa) | ≥1.5 | ||
| Durometer (Shore A) | 15-60 | ||
| Electrical Properties | Dielectric Constant (50Hz) | 3.0 | |
| Dielectric Strength (KV/mm) | ≥18 | ||
| Volume Resistivity (Ω.cm) | ≥1x1015 | ||
| Operating Temperature Range (oC) | -50---250 | ||
Using Method
Clean surface: clean the bonding surface
Application: cut outlet nozzle, extrude silicone rubber by glue gun, coating evenly immediately, then attach bonding surface
Curing: cured at room temperature in air
Packing
300ml/pc, 24pcs/carton
Remark
The above information is based on our extensive experiments, results are reliable. However, because practical application is varied, we can't control the application condition, users need to confirm whether the product is suitable by testing before mass production. Our company aren't responsible for any direct, indirect or accidental loss when the products are used in specific condition. If user have any problem with our products, please contact with our technical service department, we will try our best to offer the most possible help.
Our Service
1. Sample: Sample is free for our valuable customer.
2. OEM: OEM service is provided for our valuable customer.
3. Welcome to visit our factory anytime.
4. Welcome to be our brand "TBL" distributor in your local place.
Our Factory