Shenzhen Skoocom Electronic Co.,Ltd is one of the leading manufacturers and suppliers of SC1301XPV Micro Vacuum Air Pump for Beauty Devices in China. We provide high quality products for medical devices and beauty appliance. Welcome to wholesale RoHS, REACH and ISO certified products made in China here and get quotation from our factory. Also, custom service and ODM service are available.
SC1301XPV Miniature Diaphragm Vacuum Air Pump for Cosmetic Instruments & Beauty Devices
Model: SC1301XPV | Legacy Model: SC3403PM (Fully Compatible Upgrade)
Engineered specifically for handheld facial cleansing tools, vacuum blackhead removers, oxygen injection meters, and portable beauty hardware requiring whisper-quiet operation and 100,000-cycle durability.
Engineered for Aesthetic Hardware
Whisper-Quiet Acoustic Profile (<55 dB @ 30cm): Re-engineered diaphragm stroke dramatically cuts motor resonance, providing comfortable near-ear operation essential for facial care devices.
Precision Facial Vacuum (< -26 kPa, >0.7 L/min Flow): Optimized negative suction pressure safely removes pore debris without causing epidermal bruising or tissue over-stretching.
Extended 100,000-Cycle Endurance: Delivers 100,000 cycles (10s ON, 7s OFF) with proprietary medical-grade rubber diaphragms, ensuring zero vacuum degradation over product lifespans.
Ultra-Slim Form Factor (42.0 × 12.5 × 27.5 mm): Compact 12.5 mm cross-section fits seamlessly inside sleek, ergonomic handheld beauty wands.
Drop-in Replacement for SC3403PM: Identical mounting pitch (2-ø1.5mm) and standardized port dimensions ensure seamless hardware upgrades without mold retooling.
Technical Specifications
*Source: Verified against official engineering drawing SC1301XPV (SC3403PM). Test ambient: 0~50 °C, 75% RH. Dimensions are subject to engineering tolerance standards (±0.3mm to ±0.5mm).
| Parameter | DC 3.0V Spec | DC 6.0V Spec | DC 12.0V Spec | Test Condition / Engineering Remark |
|---|---|---|---|---|
| Current Model | SC1301XPV | New generation standard product | ||
| Old Model Reference | SC3403PM | Backward compatible in footprint & port geometry | ||
| Rated Operating Voltage | DC 3.0V | DC 6.0V | DC 12.0V | 3V model ideal for single-cell 3.7V Li-ion systems |
| Rated Current | < 500 mA | < 350 mA | < 150 mA | Operating under maximum rated load |
| Air Flow Rate | > 0.7 L/min | Free air displacement | ||
| Peak Vacuum Degree | < -26 kPa (∼ -195 mmHg) | Negative pressure threshold for safe facial suction | ||
| Acoustic Noise Level | < 55 dB | Measured 30 cm distance on acoustic damping sponge | ||
| Cycle Lifetime | ≥ 100,000 cycles | Standard test: 10s running, 7s resting cycle | ||
| Applicable Medium | Air | Clean, non-condensing gas | ||
| Overall Body Dimensions | 42.00 × 12.50 × 27.50 mm | Length: 42.0±0.5mm, Width: 12.5±0.3mm, Height: 27.5±0.3mm | ||
| Nozzle Geometry | Outlet: ø3.40mm (L 5.9mm) | Inlet: ø3.60mm (L 5.6mm) | Distance between ports: 6.80 ± 0.2 mm | ||
| Mounting Interface | 2 - ø1.50 ± 0.1 mm | Chassis mounting screw fixation holes | ||
Why Aesthetic Equipment Engineers Specify the SC1301XPV
1. Vacuum Pore Cleaners & Microdermabrasion Devices
Modern pore cleaners require gentle, controlled suction to lift impurities without skin irritation. SC1301XPV generates consistent negative pressure (< -26 kPa) with minimal pressure ripple. Combined with its rapid air evacuation (>0.7 L/min), it delivers instantaneous suction response when touching skin, preventing lag while protecting sensitive dermal barriers.
2. Portable Oxygen Facial Injectors & Mesotherapy Wands
Delivering micro-atomized serums requires stable positive pneumatic discharge. The precision dual-port configuration of SC1301XPV can be adapted to pressurize cosmetic liquid reservoirs, creating a fine nutrient mist that enhances transdermal absorption.
3. Micro-Airbag Facial & Eye Contour Massagers
Weighing only grams with a 12.5mm slim outline, SC1301XPV fits into wearable eye masks and headbands, inflating delicate multi-zone airbags to relieve periorbital fatigue without adding cumbersome weight.
Company introduction
Precision Manufacturing Backed by Skoocom Infrastructure
Established in 1998, Shenzhen Skoocom Electronic Co., Ltd. is a National "Little Giant" enterprise specializing in custom micro-pumps and precision pneumatic valves, serving over 1,500 enterprise clients globally.
Self-Sustained Tooling & Rubber Vulcanization
We operate over 30 precision injection and rubber molding units. The silicone and EPDM diaphragms powering SC1301XPV are formulated and vulcanized in-house, ensuring batch-to-batch pressure consistency and resistance to cosmetic chemical vapors.
Certified Quality Control
Operating under ISO 9001-certified protocols, all components comply with RoHS, REACH, and FDA standards. Every batch of SC1301XPV undergoes 100% pneumatic testing for air leakage, noise, and vacuum threshold before release.
Direct Replacement & Custom Engineering
Upgrading from legacy SC3403PM? We provide drop-in compatibility samples, custom wiring harness terminations, and customized motor windings for 3.7V / 7.4V lithium-ion platforms within 3–5 working days.
Our factory & equipment
Our Certificate
Get a Quote & Request CAD Engineering Files
Contact our application engineering team for customized voltage, flow curves, and sample testing.
Email: marketing@skoocom.com
Tel: +86-755-81461051
WhatsApp / WeChat: +86 18218809118
Headquarters: Shenzhen Skoocom Electronic Co., Ltd., Shenzhen, Guangdong, China
Hot Tags: SC1301XPV Micro Vacuum Air Pump for Beauty Devices manufacturers, suppliers, factory, customized, Low Flow High Pressure Metering Pump, pneumatic pumps, Micro Vacuum Pump, Micro Water Pump Price, Micro diaphragm electric pump, Air Pump
